LIST OF ITEMS:
ART-LIFT unit(1 pcs.)
Wall switch (1 pcs.)
Grinded guideways (2 pcs.)
Vertical frame elements (2 pcs.)
Horizontal frame elements: upper and lower (1 pcs.)
Screw set
1.
Before installation (setup):
Remove lift components from the box and then assemble as instructed
.
2.
Installation and adjustment:
2A.
Assemble frame components as show on
picture below
insert guideways through linear bearings. Using
hex key and 2 screws (A), join top element of
frame with both guideways.
2B.
Fasten with 6 screws (B), to a top element of the frame.
Then, screw bottom element of frame with both
guideways, using 2 screws (C) and vertical elements of
the frame 6 screws (D) with hex key .
2C.
Screw in the belt fastening (E) to bottom element of frame (F) using screws (C) and springs (D), starting from left
strap and then right strap.
ART-LIFT
Hide Your Media
A
B
A
B
1/6
