background image

AD-TVC-70R Page 1 of 7

Installation Guide 

AD-TVC-70R

AV Cart 70 Rotation

COMPONENT CHECKLIST

REQUIRED TOOLS

A

Base (x1)

E

Equipment Shelf

(x1)

F

Shelf Mounting

Bracket (x2)

B

Castor (x4)

C

Base Column (x2)

D

Upper Column (x2)

M

M8x20mm

Screw (x8)

M-A

M5x14mm

Screw (x4)

M-E

M8x50mm

Screw (x4)

M-F

Washer

(x4)

M-G

Small

Spacer (x8)

M-H

Big

Spacer (x8)

M-B

M6x14mm

Screw (x4)

M-C

M6x30mm

Screw (x4)

M-D

M8x30mm

Screw (x4)

S

Cable 

Tie (x5)

T

M6 Wrench

(x1)

U

M10 Wrench

(x1)

N

M6x8mm

Screw (x8)

O

M6x12mm

Screw (x16)

P

M6x18mm

Screw (x1)

Q

M8x8mm

Screw (x8)

R

Cable Tie 

Holder (x5)

G

Front 

Cover (x1)

J

VESA Extension

Adapter Arm (x2)

K

VESA Extension

Adapter Arm (x2)

L

Cable

Cover (x4)

H

Mounting Plate

(x1)

I

Rear Cover

(x1)

V

4mm

Allen Key (x1)

W

5mm

Allen Key (x1)

X

Cable 

Clips (x2)

• Phillips Head Screwdriver

CAPACITY

IMPORTANT INFORMATION

!  Please ensure this product is installed as per these installation instructions. 

!  The manufacturer accepts no responsibility for incorrect installation.
!  Failure to assemble this product correctly may cause serious injury/death during or following installation.
!  This product should only be installed by professional installers of good mechanical aptitude, who fully understand these  
 

instructions and the consequences of incorrect installation. 

!  Do not over tighten screws.
!  Two person installation is recommended.
!  Product not suitable for use outdoors.
!  After installation is complete check to verify that AV Cart is secure and safe for use.
!  Curved monitors, deep devices (such as all-in-one PCs), VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA  
 

locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range.  

 

Please contact Atdec if you would like further information.

WARNING!

 Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control  

    or toys placed on the cart may encourage a child to climb on the cart and as a result the cart may tip over on to the child.

DISPLAY

0-70kg (0-154lb)
37” - 70”

SHELF

  

0-5kg (0-11lb)

Summary of Contents for AD-TVC-70R








Reviews: