![background image](http://html1.mh-extra.com/html/da-lite/mps-acm/mps-acm_instructions_3118487001.webp)
Mobile Plasma Stand Automated Confidence Monitor
MPS-ACM
Form E-443
Rev. 08 / 10
Caution:
The user of this product should exercise
caution when moving the Mobile Plasma Stand. Any
sudden stop could cause instability of the stand and could
cause serious injury and/or damage. The stand should
always be pushed, never pulled, by the user. Always push
from the side of the stand, never from the front or back of
the stand.
IMPORTANT SAFETY INSTRUCTIONS
When using your video equipment, basic safety
precautions should always be followed, including the
following:
1. Read and understand all instructions before
using.
2. Position the cord so that it will not be tripped
over, pulled, or contact hot surfaces.
3. If an extension cord is necessary, a cord with a
current rating at least equal to that of the
appliance should be used. Cords rated for less
amperage than the appliance may overheat.
4. To reduce the risk of electric shock, do not
disassemble this appliance. Contact an
authorized service dealer when repair work is
required. Incorrect reassembly can cause
electric shock when the appliance is used
subsequently.
5. The use of an accessory attachment not
recommended by the manufacturer may cause
a risk of fire, electric shock, or injury to
persons.
SAVE THESE INSTRUCTIONS
Required Tools:
-
7/16” wrench
-
9/16" wrench
-
3/16” allen wrench
-
Phillips screwdriver
Procedure
1. Remove contents from carton and
examine for damaged or missing parts.