19” WOOD RACKS 4U – 16U
ASSEMBLY INSTRUCTIONS
Panels A & B
Your Kit Consists of
2 x Top/Bottom Panels
2 x Side Panels
4 x Stick-On Feet
Pilot Holes for
mounting
Rear Rails are
provided
See accessory
listings
A
D
Position panels C & D
behind the connector
blocks as shown
Using the heel of
your hand only, tap
them into place
DO NOT TIGHTEN
THE SCREWS
Panels C & D
The mounting
Rails should be
positioned at the
front of the rack
If fitting Plexi-Glass
Doors put this edge
at the FRONT of the
rack
Check all the
drilled edges are
on the same side
C
A
