HP StorageWorks 2/16 - SAN Switch Manual Download

Page: 60 / 250

Advanced Web Tools user guide

Fabric OS 3.x Document Addendum

5. Optional: To filter events within a certain time period:

Click From and enter the start time and date in the fields.

Click To and enter the finish time and date in the fields.

6. Optional: To filter all events beginning at a certain date and time, click From and enter the

start time and date in the fields.

7. Optional: To filter events up until a certain date and time, click To and enter the finish

time and date in the fields.

8. Click OK.

The filter is enabled and the enabled filter type is displayed in the Events Report.

Filtering Events by Event Severity

To filter events by event severity levels:

1. Access Web Tools.

2. Find the Fabric tool bar.

3. Select the Fabric Events icon in the lower corner of the Fabric Tree.

The Fabric Events window opens.

4. Click Filter.

The Event Filter dialog box opens.

5. Click Level.

The event severity level check boxes are enabled.

6. Select the event levels you want to display.

7. Click OK.

The filter is enabled and the enabled filter type is displayed in the Events Report.

Summary of Contents for StorageWorks 2/16 - SAN Switch



























































































































































































































































Search results

Summary of Contents for StorageWorks 2/16 - SAN Switch

Reviews:

Related manuals for StorageWorks 2/16 - SAN Switch

Brands by name

Popular brands

HP StorageWorks 2/16 - SAN Switch, Manual

Search results

Summary of Contents for StorageWorks 2/16 - SAN Switch

Reviews:

Related manuals for StorageWorks 2/16 - SAN Switch

Brands by name

Popular brands