Sheet Code:
BP-IM-075_REV3
Release Date: 22/06/2022
Copyright 2022 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Self-Service Mount
In the Box
Fixings List
* Due to the modular nature of
our product range you may receive
additional fixings in the fixings kit
Complete the steps for your chosen
Stand up until the point of attaching
the Case. Then turn to this Manual.
1
Remove the backing from Adhesive
Strips. With the cable resting in the
bend, centre your Payment Device and
firmly press down. Plug in the USB cable
4
1x Self-Service Mount
4x M4
buttonhead
screw (20mm)
T20 torx
allen key
1x Spacer
Main Product
Manual
Route the Payment Device Charger
Cable through the Self-Service
Mount.
3
Payment Device
Payment Device
Charger Cable
Adhesive Strip
Backing
Remove the backing from the
Spacer. Align with the screw holes
on the Case and firmly stick down.
2
Backing
Spacer
Depending on the size of your tablet/case, note the mounting location.
5
12” Tablet (Mega Case)
10-11” Tablet (Maxi Case)
