Removal and replacement procedures 64
3.
Unlock the server if necessary and remove the access panel as described in the section “System
covers.”
4.
Remove the air baffle as described in the section “Removing a processor.”
5.
Remove the two screws (Figure 3-43, 1) and take off the rear fan (Figure 3-43, 2).
WARNING:
Be sure to support the fan with your hands when removing it from the chassis. The fan
could fall and cause personal injury or equipment damage if not supported.
6.
Disconnect the fan cable from the system board connector (Figure 3-43, 3).
Figure 3-383
Removing the rear chassis fan assembly
7.
Lift the fan assembly away from the rear panel and from the chassis.
All manuals and user guides at all-guides.com
Summary of Contents for ProLiant ML150 G6
Page 12: ...Customer self repair 12 All manuals and user guides at all guides com ...
Page 13: ...Customer self repair 13 All manuals and user guides at all guides com ...
Page 14: ...Customer self repair 14 All manuals and user guides at all guides com ...
Page 15: ...Customer self repair 15 All manuals and user guides at all guides com ...
