Removal and replacement procedures 45
2.
Using the processor removal tool, remove the processor from the system board:
a.
Line up the processor tool, ensuring the locking lever graphic on the tool is correctly oriented.
b.
Press in on the plastic tabs, and then place the tool on the processor.
c.
Release the tabs, and then carefully lift the processor and tool straight up.
Figure 3-22
Removing the processor
3.
Carefully rotate the tool, and then push in and release the tabs to secure the processor in the
tool.
Figure 3-23
Securing the processor
CAUTION:
To avoid damage to the processor, do not touch the bottom of the processor, especially
the contact area.
All manuals and user guides at all-guides.com
Summary of Contents for ProLiant ML150 G6
Page 12: ...Customer self repair 12 All manuals and user guides at all guides com ...
Page 13: ...Customer self repair 13 All manuals and user guides at all guides com ...
Page 14: ...Customer self repair 14 All manuals and user guides at all guides com ...
Page 15: ...Customer self repair 15 All manuals and user guides at all guides com ...
