HP Proliant DL580 Setup And Installation Manual Download Page 23 | Manualshive

Page: 23 / 289

background image

Server Features

Overview

The following features deliver superior four-way performance on the HP ProLiant
DL580 Generation 2 server:

•
•
•
•
•
•

•

•

•

•
•
•
•

•
•
•

Up to four Intel Xeon Processors MP with Hyper-Threading technology

400-MHz front-side bus

Four-way interleaved PC1600 ECC DDR SDRAM

64-bit, 100-MHz, quad-peer PCI-X buses

Embedded Wide Ultra3 RAID and storage solutions

RJ-45 Autosensing Ethernet NIC with Wake-On Lan (WOL) support and Preboot
eXecution Environment (PXE) support (installed in an expansion slot)

Key redundancy and hot-plug features create a high availability environment:

Advanced Memory Protection technology including online spare, single-board
mirrored memory, hot-plug mirrored memory, and Hot-Add memory
functionality

Embedded Smart Array 5i Plus Controller with support for 64-MB fully
transportable write cache

Redundant hot-plug fans in three zone (CPU, memory, I/O) configuration, each
with N+1 redundancy

Redundant hot-plug power supplies

PCI-X Hot Plug

Redundant ROM

Optional redundant NIC

The ProLiant DL580 Generation 2 server offers a highly scalable environment with
the following expansion capabilities:

Memory expansion to 32 GB

Four SCSI hard drive bays

Six PCI-X slots (four hot-plug slots)

HP ProLiant DL580 Generation 2 Server Setup and Installation Guide

1-3

HP CONFIDENTIAL

Writer: Karen Hale File Name: b-ch1 Server Features.doc

Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:23 AM

«
...
21
22
23
24
25
...
»

Summary of Contents for Proliant DL580


































































































































































































































































































Reviews:

No comments

Related manuals for Proliant DL580

Wireless Router

Brand: Watchguard Pages: 11

Brand: D-Link Pages: 32

Brand: D-Link Pages: 28

Brand: D-Link Pages: 48

Brand: D-Link Pages: 83

Brand: D-Link Pages: 155

Brand: IBM Pages: 438

Brand: LaCie Pages: 25

Brand: DCE Pages: 5

Z-DRIVE R2 E88 512GB PCI-EXPRESS X8 SSD

Brand: OCZ Pages: 2

Brand: E-Lins Pages: 9

Brand: ZyXEL Communications Pages: 2

Brand: U-Line Pages: 3

Brand: Flexport Pages: 39

Brand: IBM Pages: 2

Brand: IBM Pages: 24

Brand: TerraMaster Pages: 13

Brand: Raritan Pages: 99

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands