HP ProLiant DL360e Gen8 User Manual Download Page 83 | Manualshive

Page: 83 / 116

background image

Software and configuration utilities 83

For more information, see the product documentation on the HP website
(

http://www.hp.com/go/insightremotesupport/docs

).

Scripting Toolkit

The Scripting Toolkit is a server deployment product that delivers an unattended automated installation for

high-volume server deployments. The Scripting Toolkit is designed to support ProLiant BL, ML, DL, and SL
servers. The toolkit includes a modular set of utilities and important documentation that describes how to

apply these tools to build an automated server deployment process.
The Scripting Toolkit provides a flexible way to create standard server configuration scripts. These scripts are
used to automate many of the manual steps in the server configuration process. This automated server

configuration process cuts time from each deployment, making it possible to scale rapid, high-volume server
deployments.
For more information, and to download the Scripting Toolkit, see the HP website

(

http://www.hp.com/go/ProLiant/STK

).

HP Service Pack for ProLiant

SPP is a comprehensive systems software and firmware solution delivered as a single ISO file. This solution
uses HP SUM as the deployment tool and is tested on all supported HP ProLiant servers including HP ProLiant

Gen8 servers.
SPP has several key features for updating HP ProLiant servers. Using HP SUM as the deployment tool, SPP can

be used in an online mode on a Windows or Linux hosted operating system, or in an offline mode where the
server is booted to an operating system included on the ISO file so that the server can be updated
automatically with no user interaction or updated in interactive mode.
For more information or to download SPP, see the HP website (

http://www.hp.com/go/spp

).

HP Smart Update Manager

HP SUM is a product used to install and update firmware and software on HP ProLiant servers. HP SUM
provides a GUI and a command-line scriptable interface for deployment of firmware and software for single

or one-to-many HP ProLiant servers and network-based targets, such as iLOs, OAs, and VC Ethernet and Fibre
Channel modules.
For more information about HP SUM, see the product page on the HP website

(

http://www.hp.com/go/hpsum

).

To download HP SUM, see the HP website (

http://www.hp.com/go/hpsum/download

).

To access the

HP Smart Update Manager User Guide

, see the HP SUM Information Library

(

http://www.hp.com/go/hpsum/documentation

).

HP ROM-Based Setup Utility

RBSU is a configuration utility embedded in HP ProLiant servers that performs a wide range of configuration

activities that can include the following:

•

Configuring system devices and installed options

•

Enabling and disabling system features

«
...
81
82
83
84
85
...
»

Summary of Contents for ProLiant DL360e Gen8





















































































































Reviews:

No comments

Related manuals for ProLiant DL360e Gen8

Brand: G-Technology Pages: 35

NetVista N2800e

Brand: IBM Pages: 82

UniServer BT716F

Brand: H3C Pages: 44

Brand: Thecus Pages: 120

Brand: Supermicro Pages: 118

Brand: Advantech Pages: 43

Brand: Sun Microsystems Pages: 121

Brand: QNAP Pages: 16

Brand: San Telequip Pages: 49

Brand: Bosanova Pages: 2

Brand: Bosanova Pages: 2

Brand: Bosanova Pages: 2

Brand: Bosanova Pages: 2

Brand: Viavi Pages: 4

ProxyServer MTPSR1-100

Brand: Multitech Pages: 16

MultiArrayIII MA3a

Brand: Multitech Pages: 40

Brand: Multitech Pages: 82

Brand: TROY Group Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands