Hardware options installation 33
2.
Prepare the drive.
3.
Install the drive.
4.
Determine the status of the drive from the drive LED definitions (on page
13
).
To configure arrays, see the
HP Smart Storage Administrator User Guide
on the HP website
(
http://www.hp.com/go/smartstorage/docs
).
Drive cable options
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin
).
Two-port SATA cable option
When this cable option is installed in the eight-bay drive cage, the server supports the six-drive SATA
configuration. In this configuration, drive bays 1 through 6 are populated, while drive bays 7 and 8 contain
drive blanks.
To connect the cable option:
1.
Power down the server (on page
17
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
17
).
Summary of Contents for ProLiant DL360e Gen8
