Hardware options installation 63
Before installing a high-power GPU in the server, be sure that the power supplies support the installation of
the card. Because of the high power requirements for the card, a 750-W or higher power supply may be
required. For more information, see the HP Enterprise Configurator website
(
http://h30099.www3.hp.com/configurator/
).
For more information on estimation of power consumption and proper selection of components, see the HP
Power Advisor website (
http://www.hp.com/go/hppoweradvisor
).
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin
).
To connect the cable option:
1.
Power down the server (on page
17
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
17
).
o
Remove the server from the rack (on page
18
).
4.
Remove the access panel (on page
19
).
5.
Remove the PCI riser cage (on page
20
).
6.
Remove the existing bracket from the GPU.
7.
Install the GPU. For more information, see the documentation that ships with the GPU option.
Summary of Contents for ProLiant DL360e Gen8
