HP ProLiant DL360e Gen8 User Manual Download Page 30

Page: 30 / 116

Hardware options installation 30

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and

identify similar steps to streamline the installation process.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

To prevent damage to electrical components, properly ground the server before

beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Security bezel option

The security bezel helps prevent unauthorized physical access to the front panel components.
Install the security bezel and then lock it with the key provided with the kit.

Front video adapter option

For more information about product features, specifications, options, configurations, and compatibility, see

the product QuickSpecs on the HP Product Bulletin website (

http://www.hp.com/go/productbulletin

Depending on the model purchased, the server may look different than shown.
To install the component:

Connect the front video adapter to the front video connector.

Summary of Contents for ProLiant DL360e Gen8





















































































































Search results

Summary of Contents for ProLiant DL360e Gen8

Reviews:

Related manuals for ProLiant DL360e Gen8

Brands by name

Popular brands

HP ProLiant DL360e Gen8, User Manual

Search results

Summary of Contents for ProLiant DL360e Gen8

Reviews:

Related manuals for ProLiant DL360e Gen8

Brands by name

Popular brands