Hardware options installation 44
o
Power supply
22.
Connect the power cord to the power supply.
23.
Connect the power cord to the power source.
24.
Power up the server (on page
17
).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1.
Installing the Trusted Platform Module board (on page
45
).
2.
Retaining the recovery key/password (on page
46
).
3.
Enabling the Trusted Platform Module (on page
46
).
Enabling the TPM requires accessing RBSU ("
HP ROM-Based Setup Utility
" on page
54
). For more
information about RBSU, see the HP website (
http://www.hp.com/go/ilomgmtengine/docs
).
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
(
http://www.microsoft.com
).
CAUTION:
Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
•
Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.
•
When installing or replacing hardware, HP service providers cannot enable the TPM or the encryption
technology. For security reasons, only the customer can enable these features.
•
When returning a system board for service replacement, do not remove the TPM from the system board.
When requested, HP Service provides a TPM with the spare system board.
•
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider the
system compromised and take appropriate measures to ensure the integrity of the system data.
Summary of Contents for ProLiant DL120 G7
