Hardware options installation 40
8.
Install the battery pack.
9.
Route the cable ("
BBWC battery cabling
" on page
50
).
10.
Install the PCIe riser cage (on page
19
).
11.
Install the access panel (on page
18
).
12.
Install the server into the rack ("
Installing the server into the rack
" on page
25
).
13.
Power up the server (on page
17
).
Redundant hot-plug power supply option (with cage)
To install the component:
1.
Power down the server (on page
17
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Remove the server from the rack (on page
17
).
4.
Remove the access panel (on page
18
).
5.
Remove the air baffle (on page
19
).
6.
Remove the PCIe riser cage (on page
18
).
7.
Disconnect any power cables connected to the front drive cage.
8.
Remove all cables connected to the system board.
9.
Remove the system board.
Summary of Contents for ProLiant DL120 G7
