Hardware options installation 35
8.
Connect the optical drive and power cable to the optical drive.
9.
Connect the power connector to the power supply backplane.
10.
Connect the SATA cable to the system board. See the cabling section for correct cable routing ("
ODD
cabling
" on page
51
).
11.
Install the air baffle (on page
20
).
12.
Install the access panel (on page
18
).
13.
Install the server into the rack ("
Installing the server into the rack
" on page
25
).
14.
Power up the server (on page
17
).
Dedicated iLO management port module option
To install the component:
1.
Power down the server (on page
17
).
2.
Remove the server from the rack (on page
17
).
3.
Remove the access panel (on page
18
).
4.
Remove the air baffle (on page
19
).
Summary of Contents for ProLiant DL120 G7
