HP Pavilion ze5100 - Notebook PC User Manual Download

Page: 19 / 186

Getting Started with Your HP Notebook

Identifying Parts of the Computer

Corporate Evaluator’s Guide

•

Blinking: the AC adapter is connected and the battery is missing or has a fault.

•

Off: the AC adapter is not connected.

The keyboard status lights, located above the keyboard, indicate the states of the
keyboard locks.

Caps Lock. Caps Lock is active.

Num Lock. Num Lock is active. (The Keypad Lock must also be on to use the
embedded keypad.)

Keypad Lock. The embedded keypad is active (Fn+F8). Num Lock must also be on
for the numeric keys—otherwise, cursor control is active (as marked on an external
keyboard).

Summary of Contents for Pavilion ze5100 - Notebook PC



























































































































































































Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands

HP Pavilion ze5100 - Notebook PC, User Manual

Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands