HP Pavilion ze5100 - Notebook PC User Manual Download

Page: 100 / 186

Installing Windows 2000
Installing Retail Windows 2000 (Omnibook XE4400)

100

Corporate Evaluator’s Guide

•

Presentation Ready

•

HP universal printer driver

•

USB Wake

•

Support for the USB-serial dongle

•

Power management

Installing Chipset support

The chipset support driver is located on the Recovery CD-ROM in \hp\drivers\agp.

Double-click \hp\drivers\agp\aliagp18.exe.

Click on Next at the Welcome screen.

Click OK to complete the installation and reboot your notebook.

Installing video support

The driver is located on the Recovery CD-ROM in \hp\drivers\video.

Double-click \hp\drivers\video\setup.exe.

Click Next in the Driver Setup window.

Click Yes to accept the license agreement.

Click Finish to complete the setup and reboot the HP notebook.

After reboot, go to Start, Settings, Control Panel and double click the Display icon.

In the Display Properties window, click the Settings tab.

Choose the screen resolution 1024x768 by dragging the slider bar in the "Screen area"
to the right.

Choose True Color (32-bit) from the "Colors" drop down menu.

Click Apply, OK, and then Yes. Click OK to close the Display Properties window.

Summary of Contents for Pavilion ze5100 - Notebook PC



























































































































































































Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands

HP Pavilion ze5100 - Notebook PC, User Manual

Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands