HP Pavilion ze5100 - Notebook PC User Manual Download

Page: 117 / 186

Installing Windows XP

Installing Retail Windows XP (Omnibook XE4400)

Corporate Evaluator’s Guide

117

Installing the One-Touch utility

HP One-Touch enables support for the One-Touch buttons above the keyboard.

Run setup.exe from the One-Touch driver directory and follow the displayed

instructions.

Reboot the computer when prompted.

Installing the HP DesktopZoom utility

HP Desktop Zoom allows you to adjust the sizes of the fonts and icons of the display. To
install this utility:

Run setup.exe from the Desktop Zoom program directory.

Click Next and then Yes to accept the License Agreement.

Click Next to confirm the installation of the utility.

Click Next to confirm the installation destination.

Installing the HP Presentation Ready utility

HP Presentation Ready allows you to open a presentation and automatically adjust video
and power setting for optimum viewing.

Run setup.exe from the Presentation Ready program directory.

Click Next and then Yes to accept the License Agreement.

Click Next to confirm the installation destination.

Installing the HP Universal Printer driver

The HP Universal Printer driver is a generic postscript printer driver that allows printing
to any HP postscript printer on the network without loading a specific driver.

Summary of Contents for Pavilion ze5100 - Notebook PC



























































































































































































Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands

HP Pavilion ze5100 - Notebook PC, User Manual

Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands