HP Pavilion ze5100 - Notebook PC User Manual Download

Page: 15 / 186

Getting Started with Your HP Notebook

Identifying Parts of the Computer

Corporate Evaluator’s Guide

Identifying Parts of the Computer

Front View

1. Computer open/close latch.

2. One-Touch

buttons.

3. Keyboard status lights.

4. Power button. Turns the computer on and off.

5. Touch pad, scroll pad, click buttons, plus on-off

button.

6. Main status lights (left to right): power mode,

battery, hard disk activity.

7. Infrared port.

8. Wireless on-off button and indicator light (on

certain models).

9. Battery.

10. Audio mute button, audio mute light, and volume

control.

11. Audio jacks (left to right): audio out (headphones),

external microphone.

12. CD-ROM, DVD, or other drive.

13. Universal serial bus port (USB).

Summary of Contents for Pavilion ze5100 - Notebook PC



























































































































































































Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands

HP Pavilion ze5100 - Notebook PC, User Manual

Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands