HP Pavilion ze5100 - Notebook PC User Manual Download

Page: 38 / 186

Basic Operation
Operating Your Computer

Corporate Evaluator’s Guide

To adjust the volume

To increase or decrease the volume

•

Press Fn+PageUp or Fn+PageDown.

•

Press the back or front half of the volume control on the right side of the computer.

•

Click the speaker icon in the taskbar (if not present, see Windows Help), and drag the
volume control bar up or down.

To mute the audio

You can mute the audio output without changing the volume setting. This feature is
handy when you want to block all speaker output regardless of what your computer is
doing.

•

Press Fn+Backspace.

•

Press the audio mute button on the right side of the computer. The button lights when
audio is muted.

•

Click the speaker icon in the taskbar (if not present, see Windows Help), and click
Mute.

Summary of Contents for Pavilion ze5100 - Notebook PC



























































































































































































Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands

HP Pavilion ze5100 - Notebook PC, User Manual

Search results

Summary of Contents for Pavilion ze5100 - Notebook PC

Reviews:

Related manuals for Pavilion ze5100 - Notebook PC

Brands by name

Popular brands