Dell Alienware M11xR2 Service Manual Download

Page: 1 / 43

Alienware

M11x R2 Service Manual

Notes, Cautions, and Warnings

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

and the

DELL

logo are trademarks of Dell Inc.;

Alienware

is a trademark or registered trademark of Alienware Corporation;

Bluetooth

is a

registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license;

Microsoft, Windows,

and the

Windows

start button logo are either trademarks or registered

trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Regulatory model: P06T series Regulatory type: P06T001/P06T002

June 2010 Rev. A00

Before You Begin
Base Cover

Battery Pack

Hard Drive

Memory Module(s)

Wireless Mini-Card(s)

Hinge Cover

Keyboard

Palm Rest Assembly

Status Light Board

Power Button Board

Internal Card With Bluetooth

Wireless Technology

Coin-Cell Battery

Display Assembly

I/O Board

System Board

Speakers

System Setup

Flashing the BIOS

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

CAUTION:

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING:

A WARNING indicates a potential for property damage, personal injury, or death.

Summary of Contents for Alienware M11xR2












































Search results

Summary of Contents for Alienware M11xR2

Reviews:

Related manuals for Alienware M11xR2

Brands by name

Popular brands

Dell Alienware M11xR2, Service Manual

Search results

Summary of Contents for Alienware M11xR2

Reviews:

Related manuals for Alienware M11xR2

Brands by name

Popular brands