background image

 

Replacing the I/O Board  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Align the connectors on the I/O board with the slots on the computer base.  
 

 

  

3.

Use the pull-tab to align the connector on the I/O board with the connector on the system board and press gently.  
 

 

  

4.

Replace the three screws that secure the I/O board to the computer base.  
 

 

  

5.

Connect the speaker cable to the connector on the I/O board.  
 

 

  

6.

Replace the palm rest assembly (see 

Replacing the Palm Rest Assembly

).  

 

 

  

7.

Replace the keyboard (see 

Replacing the Keyboard

).  

 

 

  

8.

Replace the hinge cover (see 

Replacing the Hinge Cover

).  

 

 

  

9.

Replace the memory module(s) (see 

Replacing the Memory Module(s)

).  

 

 

  

10.

Follow the instructions from 

step 6

 to 

step 8

 in 

Replacing the Hard Drive

.  

 

 

  

11.

Replace the battery pack (see 

Replacing the Battery Pack

).  

 

 

  

12.

Replace the base cover (see 

Replacing the Base Cover

).  

 

 

 

Back to Contents Page

 

 

 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Alienware M11xR2












































Reviews: