HP Pavilion DV1227 Hardware And Software Manual Download Page 124

Page: 124 / 173

Hardware and Software Guide

7–1

Hardware Upgrades and

Replacements

Device Connections

Connecting a Powered Device

To connect the notebook to an optional external device that has a
power cord:

1. Be sure the device is turned off.

2. Connect the device to the jack or port on the notebook

specified by the device manufacturer.

3. Plug the device power cord into a grounded AC outlet.

4. Turn on the device.

✎

If an optional monitor that is properly connected to the monitor
port does not display an image, try pressing the

fn+f4

hotkey to

switch the image to the monitor. For more information about
image switching, refer to the

“Switch Image (fn+f4)”

section in

Chapter 2, “Keyboard and TouchPad.”

To disconnect a powered external device from the notebook:

1. Turn off the device.

2. Disconnect the device from the notebook.

Summary of Contents for Pavilion DV1227














































































































































































Search results

Summary of Contents for Pavilion DV1227

Reviews:

Related manuals for Pavilion DV1227

Brands by name

Popular brands

HP Pavilion DV1227, Hardware And Software Manual

Search results

Summary of Contents for Pavilion DV1227

Reviews:

Related manuals for Pavilion DV1227

Brands by name

Popular brands