manualshive.com logo in svg

HP Pavilion 2159m, Maintenance And Service Manual

Share
Download
HP Pavilion 2159m Maintenance And Service Manual Download Page 81

9

Using Setup Utility (BIOS) in Windows 7

Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output
devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS)
includes settings for the types of devices installed, the startup sequence of the computer, and the amount of
system and extended memory.

Starting Setup Utility (BIOS)

▲

To start Setup Utility (BIOS), turn on or restart the computer, quickly press 

esc

, and then press 

f10

.

NOTE:

Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer

from operating properly.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.

Most BIOS updates on the HP website are packaged in compressed files called 

SoftPaqs

.

Some download packages contain a file named Readme.txt, which contains information regarding installing
and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently installed on
the computer, you need to know the version of the system BIOS currently installed.

BIOS version information (also known as 

ROM date

 and 

System BIOS

) can be displayed by pressing 

fn

+

esc

 (if

you are already in Windows) or by using Setup Utility (BIOS).

1.

Start Setup Utility (BIOS).

2.

Use the arrow keys to select 

Main

, and then make note of your current BIOS version.

3.

To exit Setup Utility (BIOS) without saving your changes, use the tab key and the arrow keys to select

Exit

 

>

 

Exit Discarding Changes

, and then press 

enter

.

Downloading a BIOS update

CAUTION:

To reduce the risk of damage to the computer or an unsuccessful installation, download and

install a BIOS update only when the computer is connected to reliable external power using the AC adapter.
Do not download or install a BIOS update while the computer is running on battery power, docked in an
optional docking device, or connected to an optional power source. During the download and installation,
follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep or Hibernation.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

Starting Setup Utility (BIOS)

73

Summary of Contents for Pavilion 2159m















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands