manualshive.com logo in svg

HP Pavilion 2159m, Maintenance And Service Manual

Share
Download
HP Pavilion 2159m Maintenance And Service Manual Download Page 72

d.

Remove the webcam/microphone module from the display 

(3)

.

The webcam for touch displays is available using spare part number 810961-001.

3.

To remove the display panel:

a.

Lift the tape that secures the display cable to the connector on the back of the panel 

(1)

, and then

disconnect the display cable 

(2)

.

b.

Remove the two Phillips PM2.0×1.5 screws 

(3)

 that secure the display panel to the bottom of the

enclosure.

c.

Remove the two Phillips PM2.0×2.0 screws 

(4)

 that secure the display panel to the top of the

enclosure.

d.

Lift the top of the panel 

(5)

.

The display panel is available using spare part number 813109-001.

e.

Rotate the display panel until it is upside-down next to the display enclosure 

(1)

.

64

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for Pavilion 2159m















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands