manualshive.com logo in svg

HP Pavilion 2159m, Maintenance And Service Manual

Share
Download
HP Pavilion 2159m Maintenance And Service Manual Download Page 48

RTC battery

Description

Spare part number

RTC battery

811080-001

Before removing the RTC battery, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 29

).

5.

Remove the optical drive (see 

Optical drive on page 30

).

6.

Remove the bottom cover (see 

Bottom cover on page 34

).

To remove the RTC battery:

▲

Using a thin tool or screwdriver, disengage the battery from the socket 

(1)

, and then remove the battery

(2)

.

Reverse this procedure to install the RTC battery.

40

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for Pavilion 2159m















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands