manualshive.com logo in svg

HP Pavilion 2159m, Maintenance And Service Manual

Share
Download
HP Pavilion 2159m Maintenance And Service Manual Download Page 79

4.

Double-click the file that has an .exe extension (for example, 

filename

.exe).

The BIOS installation begins.

5.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the downloaded file

from your hard drive.

Synchronizing a tablet and keyboard (select models only)

When you attach a tablet to the keyboard and restart the computer, the BIOS checks to see if the Embedded
Controller firmware on the keyboard needs to be synchronized. If so, BIOS will start the synchronization. If
the synchronization is interrupted, a notification screen displays for 10 seconds before the tablet restarts
and attempts to synchronize again.

NOTE:

The Embedded Controller firmware will synchronize ONLY if the tablet or keyboard battery is more

than 50% charged, or if your tablet is connected to AC power.

Synchronizing a tablet and keyboard (select models only)

71

Summary of Contents for Pavilion 2159m















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands