![background image](http://html.mh-extra.com/html/hp/jetdirect-j7974e/jetdirect-j7974e_administrators-manual_163704110.webp)
When all the desired services for this template have been specified on the
Create Service Template
page, click
OK
to add the template on the
Step 2 - Specify Service Template
page. Then select the
desired service template and click
Next
.
Table 5-6
Manage Custom Services page
Item
Description
Name
Use the edit field to enter a name for the custom service.
NOTE
The custom service name must be unique.
Protocol
Select a protocol for this custom service. The default protocol is TCP.
Local Service
Select the well-known port or port range on the HP Jetdirect print server that this service
will use. Depending on the desired service, select
Single Port
and enter an applicable
port number, or select
Port Range
and enter the port range in the fields provided.
Remote Service
Select the ports on the remote hosts that this service will use. Depending on the service,
select
Single Port
, or
Port Range
, then enter the port or port range in the fields
provided.
Configured Custom Services
This list identifies the custom services that have been configured. Once a custom
service has been created, click
Add
to add the service into this list.
To remove a service from this list, select it and click
Delete
.
Specify Action
For the addresses and services specified for this rule, select an action for the print server. Selectable
actions on this page depend on whether IPsec is supported.
●
Allow traffic. (If IPsec is supported, allow IP traffic that is not protected by IPsec.)
●
Drop traffic. Do not process (discard) the specified IP traffic.
●
Require traffic to be protected with IPsec. This option appears if IPsec is supported. For this action,
you will be prompted to configure an IPsec template, that is, the IPsec authentication/encryption
settings to be applied to the specified IP traffic. See Step 3 below.
Step 3 - Specify IPsec Template
Any IPsec templates available for a rule will be listed in the
IPsec Templates
field. If none are available,
you must click
New
to create a custom template using the
Create IPsec Template
page described
below. Because IPsec templates are network dependent, predefined factory-default templates are not
included.
To view or delete a listed template, select it and click
View
or
Delete
as appropriate.
After an IPsec template has been configured in the list and selected, click
Next
to complete the rule.
Create IPsec Template
Use this page to create an IPsec template and to specify how Security Associations (SAs) will be created:
manually or dynamically. Items on this page are described below.
100
Chapter 5 IPsec/Firewall Configuration (V.34.xx)
ENWW
Summary of Contents for Jetdirect J7974E
