HP Jetdirect J7974E, Administrator'S Manual

Page: 138 / 186

Message Description
ATTACHED SERVER: The Attached Server field identifies the Jetdirect discovery method [NSQ] (Nearest
Service Query) or [GSQ] (General Service Query) and the name of the proxy file server
used to locate the configured bindery servers.
Not Specified or blank: A NetWare server has not been configured.
QUEUE POLL INTERVAL (Job Poll Interval) Specifies the time interval (seconds) that the HP Jetdirect print server
waits to check for print jobs in a print queue. The default is 2 seconds.
SAP INTERVAL: Specifies the time interval (seconds) that the HP Jetdirect print server waits between
Service Advertising Protocol (SAP) broadcasts on the network. The default is 60
seconds.
SERVER x: Identifies a NetWare file server to which the HP Jetdirect print server is attached.
AppleTalk Protocol Information
Information in this section of the Jetdirect configuration page (Ethernet Only) is described in Table
8-10 AppleTalk Configuration Information . For error messages, see Table 8-12 Error Messages .
Table 8-10 AppleTalk Configuration Information
Message Description
STATUS: Indicates the current AppleTalk configuration status.
READY: Indicates the HP Jetdirect print server is awaiting data.
DISABLED: Indicates that AppleTalk was manually disabled.
INITIALIZING: Indicates that the print server is registering the node address or name.
An additional status message may also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
Table 8-12 Error Messages .
NAME: The name of the printer on the AppleTalk network. A number after the name indicates
that there are multiple devices with this name, and this is the Nth instance of the name.
ZONE: The name of the AppleTalk network zone on which the printer is located.
TYPE: The type of the printer being advertised on the network. Two types can be displayed.
NETWORK NUMBER:
NODE NUMBER:
NETWORK NUMBER: Identifies the AppleTalk Network Number on which the HP
Jetdirect print server is currently operating.
NODE NUMBER: Identifies the AppleTalk Node Number that the print server chose for
itself as part of its initialization sequence.
NOTE The AppleTalk phase 2 (P2) parameter is preconfigured on the HP
Jetdirect print server.
DLC/LLC Protocol Information
Information in this section of the Jetdirect configuration page is described in Table 8-11 DLC/LLC
Configuration Information .
Table 8-9 Novell NetWare Configuration Information (continued)
128 Chapter 8 HP Jetdirect Configuration Pages ENWW