![background image](http://html.mh-extra.com/html/hp/jetdirect-j7974e/jetdirect-j7974e_administrators-manual_163704097.webp)
●
Country/Region
. Two-character ISO 3166 country/region code. For example, use “gb” Great Britain or “us”
for USA (required).
Install Certificate, or Install CA Certificate
screens.
Use the
Install Certificate
screen to install a Jetdirect certificate.
Use the
Install CA Certificate
screen to install a trusted Certificate Authority (CA) certificate for use during EAP authentication.
(Full-featured print servers only)
●
Install a PEM/Base64 (Privacy Enhanced Mail) encoded certificate.
To install a certificate, specify the name and path of the file that contains the certificate. Or, click
Browse
to
browse your system for the file.
Click
Finish
to complete the installation.
To install a certificate, it must be associated with a pending certificate request by the embedded Web server.
The Install Certificate option will not be presented if there is no pending request.
Import Certificate and Private Key
screen. Use this screen to import a Jetdirect certificate and private key.
●
Import a Jetdirect certificate and private key. When imported, the existing certificate and private key will be
overwritten.
The file format must be PKCS#12 encoded (.pfx).
To import a certificate and private key, specify the name and path of the file that contains the certificate and
private key. Or, click
Browse
to browse your system for the file. Then enter the password that was used to
encrypt the private key.
Click
Finish
to complete the installation.
Export the Jetdirect certificate and private key
screen. Use this screen to export the installed Jetdirect certificate and private
key to a file.
●
To export a certificate and private key, enter a password that will be used to encrypt the private key. You
must enter the password again to confirm it. Then click
Save As
to save the certificate and private key in a
file on your system. The file format will be PKCS#12 encoded (.pfx).
Access Control
NOTE
If this feature is supported on the print server and device, it is limited to IPv4 networks.
If the IPsec/Firewall feature is available, it is recommended for use in place of the Access Control
List for improved security and performance.
Use this tab to display the Access Control List (ACL) on the HP Jetdirect print server. An access control
list (or host access list) specifies individual host systems, or networks of host systems, that will be
allowed to access the print server and the attached network device. Up to 10 entries can be included
on the list. If the list is empty (no hosts are listed), any supported system can access the print server.
By default, hosts with HTTP connections (for example, through the embedded Web server or IPP—the
Internet Printing Protocol) are allowed access to the print server regardless of access control list entries.
To disable access by HTTP hosts, clear the
Allow Web Server (HTTP) access
checkbox at the bottom
of the list.
Table 4-15
Certificate Configuration Screens (continued)
ENWW
Networking Tab
87
Summary of Contents for Jetdirect J7974E
