![background image](http://html.mh-extra.com/html/hp/jetdirect-j7974e/jetdirect-j7974e_administrators-manual_163704053.webp)
If you enter
save
instead of
exit
or
quit
, you will not be prompted to save settings.
Telnet Commands and Parameters
.
Table 3-3 Telnet Commands and Parameters
lists the available
Telnet commands and parameters.
NOTE
If a parameter is supplied dynamically (for example, from a BOOTP or DHCP server),
its value cannot be changed using Telnet without first setting Manual configuration. To set Manual
configuration, see the
ip-config
command.
Whenever you are manually changing an IP address, you should also reconfigure the subnet
mask and default gateway at the same time.
Table 3-3
Telnet Commands and Parameters
Command
Description
User Control Commands
?
Displays the Help and Telnet commands.
/
Displays current values.
menu
Displays the
Menu Interface
for access to configuration parameters.
advanced
Enables the Advanced commands. Help (?) will include the Advanced commands in the
list.
general
Disables the Advanced commands. Help (?) will not include Advanced commands
(default).
save
Save the configuration values and exit the session.
exit
Exit the session.
export
Export the settings to a file for editing, and importing through Telnet or TFTP (this command
is only supported by systems, such as UNIX, that support input/output redirection).
General
passwd
Set the administrator password (shared with the embedded Web server and HP Web
Jetadmin). For example, “passwd jd1234 jd1234” sets the password to jd1234. Note that
“jd1234” is entered twice for confirmation.
Up to 16 alphanumeric characters may be used. When initiating the next Telnet session,
you will be prompted for a user name and this password.
To clear the password, enter the command without password and confirmation entries.
Passwords may be cleared by a cold reset.
sys-location
Alpha-numeric string (up to 255 characters), typically used to identify a location.
sys-contact
Alpha-numeric string (up to 255 characters), typically used to identify the name of a network
or device administrator.
ssl-state
Sets the print server's security level for Web communications:
1
: Forced redirection to the HTTPS port. Only HTTPS (secure HTTP) communications can
be used.
ENWW
IPv4 Configuration
43
Summary of Contents for Jetdirect J7974E
