Assembling the Hardware to make the DC-7600 Lamination Station
After receiving the DC-7600 Lamination station, some assembly is required. This Instructions set will help in
providing the steps to assembly the station quickly.
You will need a
1) Magnetic #1 Phillips screwdriver to assembly the hardware that makes up the station.
First, take inventory of the parts you received.
Laminator Stand
DC-5100
Laminator
Laminator Power
Brick assembly
USB
Cable
Laminator to Printer
Communication Cable
DC-7600
Card Printer
Station
Mounting Plate
Laminator Fastening
Hardware and
Laminate RFID Tag
Laminate and
Take-up Spool
DC-7600 Card Printer Assesories
Printer
Fastening
Hardware
0.76mm
PVC Cards
