Power Distribution Units
In each HPE Intelligent Series Rack, four PDUs are mounted at the bottom of the rack.
PDU numbering:
•
PDUs mounted horizontally—Numbered 0 to 1 from bottom to top.
•
PDUs mounted vertically—Numbered 0 to 1 from left to right.
Verify that there is enough clearance for service.
For example:
•
The PDUs mounted vertically at the rear of a rack must have enough clearance to remove
controller node and drive chassis power supples.
•
The PDUs mounted vertically at the bottom of the rack so to provide a front-mounting unit
space.
Service Processor
There are two types of service processors:
•
Physical service processor (SP)
SPS (single power supply)
◦
◦
RPS (redundant power supply)
•
Virtual service processor (VSP)
If your configuration includes a physical SP, it is located at the bottom of the rack under the
enclosures and above the PDUs.
Figure 31 HPE 3PAR service processor
For more information, see
“Connecting to a Physical Service Processor” (page 96)
.
Power Distribution Units
39
Summary of Contents for HPE 3PAR StoreServ 8000
Page 142: ...142 Warranty and regulatory information ...
Page 143: ...Regulatory Information 143 ...
