2.
Verify that the following has been completed for the 3PAR StoreServ Storage:
•
Powered on
•
Connected to the same network subnet as the SP
•
Non-initialized to allow the SP to verify the 3PAR StoreServ Storage serial number
3.
Click the
Generate SP ID
button.
4.
After the SP ID is generated, click
Next
to proceed to the next wizard step.
SP Wizard step 3—Networking
The
Configure Service Processor Networking
page shows the information that is required to
configure the SP. To complete this section, use the completed installation checklist from
HPE 3PAR StoreServ 8000 Site Planning Manual
as reference.
NOTE:
For additional information and help, use the 3PAR SmartStart online help (accessible
by pressing
F1
).
1.
Enter the SP information in the following fields:
•
SP hostname
•
IP Address (static)
CAUTION:
Be sure to enter the permanent SP IP address. If you continue to use the
temporary SP IP address, you might prevent additional system setups from being
completed successfully.
•
Subnet Mask
•
Gateway
To adjust the network speed, expand the
Advanced
option to change the settings.
If you are setting up a VSP , enter the permanent IPv4 address that you want to assign to
it.
2.
Do
NOT
check the
Enable DNS Support
box or enter values for
Domain IP Addresses
or
DNS Server(s)
.
WARNING!
Do
NOT
configure DNS settings using the SP setup wizard; instead, manually
configure DNS using the
3parcust
account after successfully completing the installation.
To manually configure DNS settings after installation, in SPOCC, click the SPMAINT tab,
select option 2 —
Network Configuration
, then select option 9 —
DNS Configuration
.
If you do configure DNS using the SP setup wizard,
you must reinstall the Service
Processor software and begin the SP initialization using the SP setup wizard again
.
3.
Click
Next
to proceed to the next wizard step.
HPE 3PAR Service Processor Setup Wizard
103
Summary of Contents for HPE 3PAR StoreServ 8000
Page 142: ...142 Warranty and regulatory information ...
Page 143: ...Regulatory Information 143 ...
