3 Identifying System Components and Numbering
NOTE:
The illustrations in this chapter are examples only and might not accurately represent
your storage-system configuration.
Due to the large number of prospective configurations, component placement and internal cabling
is standardized to simplify installation and maintenance. System components are placed in the
rack according to the principles outlined in this chapter, and are numbered according to their
order and location in the cabinet.
Bezel
Bezel LEDs
Figure 1 Bezel LEDs location
Table 2 Bezel LEDs description
Indicates
State
Appearance
Function
LED Icon
Power
On
Green
System Power
1
No power
Off
Enclosure powered by the battery
On
Amber
System Standby
Fault
On
Amber
Module Fault
2
No fault
Off
Fault—An issue exists with one or more drives within
the enclosure. Inspect the LEDs on each drive to
determine the affected drive(s).
On
Amber
Drive Status
3
This LED applies only to drives.
No fault
Off
14
Identifying System Components and Numbering
Summary of Contents for HPE 3PAR StoreServ 8000
Page 142: ...142 Warranty and regulatory information ...
Page 143: ...Regulatory Information 143 ...
