manualshive.com logo in svg

HP ESG-D Series, User Manual

Share
Download
HP ESG-D Series User Manual Download Page 97

3-35

Troubleshooting

ESG-D Series Signal Generator Instrument-Specific Error Messages

 

Settings conflict;Enabled mod source conflicts 

with previously enabled mod source. Previous 

mod disabled.

The signal generator has three sources: INT, EXT1, and EXT2 
that are shared by the FM1/PM1, AM1/AM2, FM2/PM2, pulse 
(INT and EXT2), and burst envelope (EXT1 only). Each source 
can only be used by one of the modulations at a time. If a 
source is being used by an active modulation, and a request for 
the source is made by another modulation, the first modulation 
will be turned off, the second modulation will be turned on.

 

Settings conflict;External burst cannot be on 

while using AM.

Indicates that there is a hardware conflict for the burst envelope 
using the EXT1 source (I/Q menu) and AM1/AM2. The most 
recently requested modulation will be turned on, the previous 
modulation will be turned off.

 

Settings conflict;FM & PM not allowed.

Indicates that there is a hardware conflict between FM and PM. 
The most recently requested modulation will be turned on, the 
previous modulation will be turned off.

 

Settings conflict;Pulse modulation cannot be on 

with internal burst.

Indicates that there is a hardware conflict between pulse 
modulation and internal burst. The most recently requested 
modulation will be turned on, the previous modulation will be 
turned off.

 

Settings conflict;Internal burst cannot be on 

with pulse modulation.

Indicates that there is a hardware conflict between internal 
burst and pulse modulation. The most recently requested 
modulation will be turned on, the previous modulation will be 
turned off.

Summary of Contents for ESG-D Series









































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands