![HP ESG-D Series User Manual Download Page 397](http://html.mh-extra.com/html/hp/esg-d-series/esg-d-series_user-manual_160473397.webp)
5-261
Hardkey and Softkey Reference
Mode - PDC
Ext
Press this softkey in the data selection menus to select external data. With
Ext
selected, you should apply the data signal to the DATA INPUT connector. If you
have selected
Ext
as a data pattern for modulated transmissions that are not framed
(
Data Format Pattern Framed
is set to
Pattern
),
Ext
is displayed in the
Data
field
in the top line of the text area of the display. If you have selected
Ext
for
configuring the timeslot data fields,
EXT
is displayed in either the
Data
field or
the
TCH
field, both of which are located near the bottom of the text area of the
display. In framed mode, the external data is gated to the data regions of the
timeslot.
Another
Ext
softkey is located in the Frame Trigger and Pattern Trigger menus.
Press
Ext
in either of these two menus to select external triggering for your data
pattern. Apply a TTL input to the rear panel PATTERN TRIG IN connector to
trigger your frame or pattern data.
Softkey Location: Press
Mode
,
PDC
,
Data
,
Ext
or press
Mode
,
PDC
,
Data Format Pattern Framed
,
Configure Timeslot
,
Configure Up TCH
,
TCH
,
Ext
or press
Mode
,
PDC
,
Pattern Repeat Single Cont
,
Pattern Trigger
,
Ext
or press
Mode
,
PDC
,
Data Format Pattern Framed
,
Frame Repeat Single Cont
,
Frame Trigger
,
Ext
Ext
is also located in the Configure Up Custom menu, the Configure Down
Custom menu and in the TCH Menu found in the Configure Down TCH menu.
SCPI Commands:
[:SOURce]:RADio:PDC:DATA EXTernal
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:DCUStom EXTernal
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:DTCHannel[:TCHannel] EXTernal
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:UCUStom EXTernal
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:UTCHannel[:TCHannel] EXTernal
[:SOURce]:RADio:PDC:TRIGger[:SOURce] EXTernal
Summary of Contents for ESG-D Series
