HP ESG-D Series, User Manual

Page: 101 / 712

3-39
Troubleshooting
ESG-D Series Signal Generator Instrument-Specific Error Messages
Data out of range;Manual point exceeds power
list size. Limiting to maximum point.
Indicates that the sweep/list manual point has been reassigned
to a smaller number value due to the longest list shrinking, or
being turned off. Its new value is the length of the power list,
which is the longest enabled list.
-223
Too Much Data;The number of list points exceeds
the maximum allowed.
Indicates that a SCPI list has been entered that is longer than
the maximum allowed length, which is also the maximum
number of step points; too many points were given for a
frequency, amplitude, or dwell time list. This error can also be
caused by attempting to copy items in the list editor when the
list is already at its maximum length.
-230
Data corrupt or stale;RAM copy of <filename>.
The non-volatile RAM copy of a file is either corrupt or is out
of date with the EEPROM master copy (if one exists). The
system automatically re-initializes the file from EEPROM (if
appropriate) or from a default algorithm. A potential cause is a
failing backup battery.
Data corrupt or stale;EEPROM copy of
<filename>.
The EEPROM copy of a file is either corrupt or otherwise
unusable. The system automatically updates the non-volatile
RAM copy of the EEPROM copy using a default initialization.
The actual EEPROM file is left as it is. Report this problem to
the factory.
-231
Data questionable;RAM copy of <filename>.
Indicates that the non-volatile RAM copy of a file has a
correctable error. The system automatically performs the
correction. A potential cause is a failing backup battery.
Data questionable;EEPROM copy of <filename>.
Indicates that the EEPROM copy of a file has a correctable
error. The system automatically performs the correction. A
potential cause is a failing EERPOM. Report this problem to
the factory.