HP ESG-D Series, User Manual

Page: 379 / 712

5-243
Hardkey and Softkey Reference
Mode - PDC
16 1’s & 16 0’s
Press this softkey to select a binary data pattern that consists of sixteen ones
followed by sixteen zeroes. If you have selected
16 1’s & 16 0’s
in a pattern data
transmission, both the
Data
and the
Other Patterns
softkeys will show this
selection. In addition,
P16
(where “P” refers to Pattern and “16” refers to sixteen
ones and sixteen zeroes) is displayed in the
Data
field in the top line of the text
area of the display. If you have selected
16 1’s & 16 0’s
in a framed data
transmission, both the
TCH
and the
Other Patterns
softkeys will show this
selection. Also,
P16
is displayed in either the
Data
field or the
TCH
field, both of
which are located near the bottom of the text area of the display. A single output
of a framed P16 data pattern consists of enough repetitions of sixteen ones
followed by sixteen zeroes, followed by sixteen ones and sixteen zeroes, and so
on, until the data fields in the timeslot are filled.
Softkey Location: Press
Mode
,
PDC
,
Data
,
Other Patterns
,
16 1’s & 16 0’s
or press
Mode
,
PDC
,
Data Format Pattern Framed
,
Configure Timeslot
,
Configure Up TCH
,
TCH
,
Other Patterns
,
16 1’s & 16 0’s
16 1’s & 16 0’s
is also located in the Other Patterns menus found in the Up Custom
menu, the Down custom menu, and the Down TCH menu.
SCPI Commands:
[:SOURce]:RADio:PDC:DATA P16
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:DCUStom P16
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:DTCHannel[:TCHannel] P16
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:UCUStom P16
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:UTCHannel[:DATA] P16