HP ESG-D Series User Manual Download Page 669

Page: 669 / 712

8-3

Safety and Regulatory

Instrument Markings

The following markings and caution and warning labels are used on the
instrument. Be sure to observe all cautions and warnings.

WARNING

No user serviceable parts inside. Refer servicing to qualified personnel.

The instruction manual symbol. The product is marked with
this symbol when it is necessary for the user to refer to the
instructions in the manual.

The CE mark is a registered trademark of the European
Community (if accompanied by a year, it is the year when the
design was proven).

The CSA mark is the Canadian Standards Association safety
mark.

This symbol is used to mark the on position of the power line
switch.

This symbol is used to mark the standby position of the power
line switch.

This symbol indicates that the input power required is AC.

ISM 1-A

This is a symbol of an Industrial Scientific and Medical Group
1 Class A product. (CISPER 11, Clause 4)

Summary of Contents for ESG-D Series









































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ESG-D Series

Reviews:

Brands by name

Popular brands

HP ESG-D Series, User Manual

Search results

Summary of Contents for ESG-D Series

Reviews:

Brands by name

Popular brands