HP ESG-D Series, User Manual

Page: 426 / 712

5-290
Hardkey and Softkey Reference
Mode - PHS
32 1’s & 32 0’s
Press this softkey to select a binary data pattern that consists of thirty-two ones
followed by thirty-two zeroes. If you have selected
32 1’s & 32 0’s
in a pattern data
transmission, both the
Data
and the
Other Patterns
softkeys will show this
selection. In addition,
P32
(where “P” refers to Pattern and “32” refers to
thirty-two ones and thirty-two zeroes) is displayed in the
Data
field in the top line
of the text area of the display. If you have selected
32 1’s & 32 0’s
in a framed data
transmission, both the
TCH
and the
Other Patterns
softkeys will show this
selection. In addition,
P32
is displayed in either the
Data
field or the
TCH
field,
both of which are located near the bottom of the text area of the display. A single
output of a framed P32 data pattern consists of enough repetitions of thirty-two
ones followed by thirty-two zeroes, followed by thirty-two ones and thirty-two
zeroes, and so on, until the data fields in the timeslot are filled.
Softkey Location: Press
Mode
,
PHS
,
Data
,
Other Patterns
,
32 1’s & 32 0’s
or press
Mode
,
PHS
,
Data Format Pattern Framed
,
Configure Timeslot
,
Configure TCH
,
TCH
,
Other Patterns
,
32 1’s & 32 0’s
32 1’s & 32 0’s
is also located in the Other Patterns menus found in the uplink and
downlink Configure Custom menus and the uplink Configure TCH menu.
SCPI Commands:
[:SOURce]:RADio:PHS:DATA P32
[:SOURce]:RADio:PHS:DLINk:SLOT[1]|2|3|4:CUSTom P32
[:SOURce]:RADio:PHS:DLINk:SLOT[1]|2|3|4:TCHannel[:TCHannel] P32
[:SOURce]:RADio:PHS:ULINk:SLOT[1]|2|3|4:CUSTom P32
[:SOURce]:RADio:PHS:ULINk:SLOT[1]|2|3|4:TCHannel[:TCHannel] P32