Front bezel security
The front bezel can be locked in place by installing a security screw provided by HP. To install the security
screw:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 72
).
2.
Remove the access panel (
Access panel on page 73
).
3.
Remove one of the five silver 6-32 standard screws located on top of the drive cage.
4.
Install the security screw through the middle front bezel release tab to secure the front bezel in place.
5.
Replace the access panel.
6.
If the computer was on a stand, replace the stand.
7.
Reconnect the power cord and turn on the computer.
8.
Lock any security devices that were disengaged when the access panel was removed.
74
Chapter 5 Removal and replacement procedures – small form factor (SFF) chassis
