manualshive.com logo in svg

HP EliteDesk 705 G1, Maintenance And Service Manual

The HP EliteDesk 705 G1 is a powerful and reliable desktop computer designed for business professionals. With its sleek design and top-of-the-line features, this product ensures optimal performance. You can easily access all the necessary information about this device by downloading the free brochure and specs manual from manualshive.com.

Share
Download
background image

6.

Under 

I need help immediately

, click 

System Recovery

.

7.

Select 

Yes

, and then click 

Next

. Your computer restarts.

8.

When the computer restarts, you will see the Recovery Manager welcome screen again. Under 

I need

help immediately

, click 

System Recovery

. If you are prompted to back up your files, and you have not

done so, select 

Back up your files first (recommended)

, and then click 

Next

. Otherwise, select 

Recover

without backing up your files

, and then click 

Next

.

9.

System Recovery begins. After System Recovery is complete, click 

Finish

 to restart the computer.

10.

When Windows has loaded, shut down the computer, reconnect all peripheral devices, and then turn the
computer back on.

System Recovery when Windows is not responding

CAUTION:

System Recovery deletes all data and programs you created or installed.

If Windows is not responding, but the computer is working, follow these steps to perform a System Recovery.

1.

Turn off the computer. If necessary, press and hold the power button until the computer turns off.

2.

Disconnect all peripheral devices from the computer, except the monitor, keyboard, and mouse.

3.

Press the power button to turn on the computer.

4.

As soon as you see the HP logo screen, repeatedly press the 

F11

 key on your keyboard until the

Windows is Loading Files…

 message appears on the screen.

5.

At the HP Recovery Manager screen, follow the on-screen instructions to continue.

6.

When Windows has loaded, shut down the computer, reconnect all peripheral devices, and then turn the
computer back on.

System Recovery using recovery media (select models only)

Use the steps provided in this section if you created recovery media using 

Creating recovery media using HP

Recovery Manager (select models only) on page 217

. If you used HP Recovery Disc Creator to create a

Windows 7 operating system DVD and a 

Driver Recovery

 DVD, use the steps in 

Using HP Recovery Disc

operating system discs (select models only) on page 222

.

CAUTION:

System Recovery deletes all data and programs you have created or installed. Back up any

important data to a CD or DVD or to a USB flash drive.

To perform a System Recovery using recovery media:

1.

If you are using a set of DVDs, insert the first recovery disc into the DVD drive tray, and close the tray. If
you are using a recovery USB flash drive, insert it into a USB port.

2.

Click the 

Start

 button, and then click 

Shut Down

.

or

If the computer is not responding, press and hold the power button for approximately 5 seconds or until
the computer turns off.

3.

Disconnect all peripheral devices from the computer except the monitor, keyboard, and mouse.

4.

Press the power button to turn on the computer, and press 

Esc

 as the computer is powering on to

display the startup menu.

5.

Use the arrow keys to select the boot menu, and press 

Enter

. Use the arrow keys to select the location

where the recovery media is inserted (USB or DVD). Press 

Enter

 to boot from that device.

Backing up, restoring, and recovering in Windows 7 221

Summary of Contents for EliteDesk 705 G1























































































































































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G1

Acer Aspire T135 Guia Do Usuário preview
Aspire T135
Brand: Acer Pages: 24
Vecow RCS-9000 User Manual preview
RCS-9000
Brand: Vecow Pages: 172
Vecow ECS-9000 User Manual preview
ECS-9000
Brand: Vecow Pages: 127
Kontron KBox B-201-CFL User Manual preview
KBox B-201-CFL
Brand: Kontron Pages: 68
Sun Microsystems Sun-1 Reference Manual preview
Sun-1
Brand: Sun Microsystems Pages: 92
C&T Solution VCO-6000-ADL User Manual preview
VCO-6000-ADL
Brand: C&T Solution Pages: 118
Lenovo 10MK User Manual And Hardware Maintenance Manual preview
10MK
Brand: Lenovo Pages: 61
Lenovo 10NX User Manual And Hardware Maintenance Manual preview
10NX
Brand: Lenovo Pages: 66
Lenovo 11KC000WGE Hardware Maintenance Manual preview
11KC000WGE
Brand: Lenovo Pages: 92
Lenovo 10T7 User Manual And Hardware Maintenance Manual preview
10T7
Brand: Lenovo Pages: 68
Lenovo 10M9 User Manual And Hardware Maintenance Manual preview
10M9
Brand: Lenovo Pages: 68
Lenovo 10RR User Manual And Hardware Maintenance Manual preview
10RR
Brand: Lenovo Pages: 68
Lenovo 11GJ0028US User Manual preview
11GJ0028US
Brand: Lenovo Pages: 106
Lenovo 10S0 User Manual And Hardware Maintenance Manual preview
10S0
Brand: Lenovo Pages: 68
Lenovo 10HA Hardware Maintenance Manual preview
10HA
Brand: Lenovo Pages: 142
Lenovo 1271 Hardware Maintenance Manual preview
1271
Brand: Lenovo Pages: 170
Lenovo 11BG User Manual preview
11BG
Brand: Lenovo Pages: 118
Lenovo 10BB User Manual preview
10BB
Brand: Lenovo Pages: 110

Brands by name

Popular brands

Load more brands