4.
Pull the green latch next to the drive outward (1) and slide the drive out of the bay (2).
Installing a hard drive
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 36
).
2.
Remove the access panel (
Access panel on page 37
).
3.
You can install a 3.5-inch hard drive or a 2.5-inch hard drive with a 3.5-inch adapter bracket similar to
the example shown below.
●
Slide the 2.5-inch drive into the bay adapter bracket, ensuring the connector on the drive is fully
inserted into the connector on the adapter bracket.
54
Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
