manualshive.com logo in svg

HP EliteDesk 705 G1, Maintenance And Service Manual

The HP EliteDesk 705 G1 is a powerful and reliable desktop computer designed for business professionals. With its sleek design and top-of-the-line features, this product ensures optimal performance. You can easily access all the necessary information about this device by downloading the free brochure and specs manual from manualshive.com.

Share
Download
background image

12 System backup and recovery

Backing up, restoring, and recovering in Windows 8.1 or

Windows 8

Your computer includes tools provided by HP and Windows to help you safeguard your information
and retrieve it if you ever need to. These tools will help you return your computer to a proper working state
or even back to the original factory state, all with simple steps.

This section provides information about the following processes:

●

Creating recovery media and backups

●

Restoring and recovering your system

NOTE:

This section describes an overview of backing up, restoring, and recovering options. For more details

about the tools provided, see Help and Support. From the Start screen, type 

help

, and then select 

Help and

Support

.

Creating recovery media and backups

Recovery after a system failure is only as good as your most recent backup.

1.

After you successfully set up the computer, create recovery media. This step creates a backup of the
recovery partition on the computer. The backup can be used to reinstall the original operating system in
cases where the hard drive is corrupted or has been replaced.

You will use a USB flash drive to create a bootable recovery drive that can be used to troubleshoot a
computer that is unable to start. The USB flash drive can be used to reinstall the original operating
system and the programs that were installed at the factory.

NOTE:

Any information on the USB flash drive will be erased before the recovery media is created.

●

To create the Windows 8.1 recovery media, from the Start screen, type 

recovery drive

, then

click on 

Create a recovery drive

. Follow the on-screen instructions to continue.

●

To create the Windows 8 recovery media, from the Start screen, type 

recovery drive

, and

then click on 

Settings

, then click on 

Create a recovery drive

. Follow the on-screen instructions to

continue.

2.

Use the Windows tools to create system restore points and create backups of personal information. For
more information and steps, see Help and Support. From the Start screen, type 

help

, and then select

Help and Support

.

Restoring and recovering using Windows tools 

Windows offers several options for restoring from backup, refreshing the computer, and resetting the
computer to its original state. For more information and steps, see Help and Support. From the Start screen,
type 

help

, and then select 

Help and Support

.

214 Chapter 12   System backup and recovery

Summary of Contents for EliteDesk 705 G1























































































































































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G1

Compaq iPAQ H3700 Series Getting Started Manual preview
iPAQ H3700 Series
Brand: Compaq Pages: 56
ASROCK DESKMINI SERIES User Manual preview
DESKMINI SERIES
Brand: ASROCK Pages: 70
Amplicon Impact 1015 User Manual preview
Impact 1015
Brand: Amplicon Pages: 92
Gigabyte BRIX IoT Quick Start Manual preview
BRIX IoT
Brand: Gigabyte Pages: 2
MicroTouch IC-100P-AA1 User Manual preview
IC-100P-AA1
Brand: MicroTouch Pages: 52
Casio PB-1000 Owner'S Manual preview
PB-1000
Brand: Casio Pages: 143
Acer Aspire AX1930 Service Manual preview
Aspire AX1930
Brand: Acer Pages: 113
Acer Aspire B300 User Manual preview
Aspire B300
Brand: Acer Pages: 19
Uplift Desk UDA121 Instructions preview
UDA121
Brand: Uplift Desk Pages: 2
AWOW AK34 Quick Manual preview
AK34
Brand: AWOW Pages: 4
Compaq AlphaServer ES40 Installation Manuals preview
AlphaServer ES40
Brand: Compaq Pages: 32
Vivo STAND-SIT1D Instruction Manual preview
STAND-SIT1D
Brand: Vivo Pages: 8
Moxa Technologies DA-682C Series Quick Installation Manual preview
DA-682C Series
Brand: Moxa Technologies Pages: 6
EVOC 104-1816CL2NA User Manual preview
104-1816CL2NA
Brand: EVOC Pages: 101
Western Digital My Book Studio Brochure preview
My Book Studio
Brand: Western Digital Pages: 2
Lucent Technologies PC Octel 100 Specification Sheet preview
PC Octel 100
Brand: Lucent Technologies Pages: 4
Shuttle XH110G Series User Manual preview
XH110G Series
Brand: Shuttle Pages: 23
REX controls Raspberry Pi User Manual preview
Raspberry Pi
Brand: REX controls Pages: 15

Brands by name

Popular brands

Load more brands