manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 34

2–4

Maintenance and Service Guide

Troubleshooting

Using Advanced Setup Utility Features

This guide describes the Setup Utility features recommended for 
all users. For more information about the Setup Utility features 
recommended for advanced users only, refer to the Help and 
Support Center, which is accessible only when the computer is in 
Windows.

The Setup Utility features available for advanced users include a 
hard drive self-test, a Network Service Boot, and settings for boot 
order preferences.

The “<F12> to boot from LAN” message that is displayed in the 
lower-left corner of the screen each time the computer is started 
or restarted in Windows or restored from hibernation is the 
prompt for a Network Service Boot.

The “Press <ESC> to change boot order” message that is 
displayed in the lower-left corner of the screen each time the 
computer is started or restarted in Windows or restored from 
hibernation is the prompt to change the boot order.

Closing the Setup Utility

You can close the Setup Utility with or without saving changes.

■

To close the Setup Utility and save your changes from the 
current session, use either of the following procedures:

❏

Press 

f10

, and then follow the instructions on the screen.

– or –

❏

If the Setup Utility menus are not visible, press 

esc

 to 

return to the menu display. Then use the arrow keys to 
select 

Exit > Exit Saving Changes

, and then press 

enter

.

When you use the 

f10

 procedure, you are offered an option 

to return to the Setup Utility. When you use the Exit 
Saving Changes procedure, the Setup Utility closes when 
you press 

enter

.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands