manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 262

B–10

Maintenance and Service Guide

Backup and Recovery

■

Create system restore points (operating system feature). 
System restore points allow you to reverse undesirable 
changes to your computer by restoring the computer to an 
earlier state.

■

Recover a program or driver (Recovery Manager software 
feature). This feature helps you reinstall a program or driver 
without performing a full system recovery.

■

Perform a full system recovery (Recovery Manager software 
feature). With Recovery Manager, you can recover your full 
factory image if you experience system failure or instability. 
Recovery Manager works from a dedicated recovery partition 
on the hard drive or from recovery discs you create.

Backing up Your Information

When to Back Up

■

On a regularly scheduled basis.

✎

Set reminders to back up your information periodically.

■

Before the computer is repaired or restored.

■

Before you add or modify hardware or software.

Backup Suggestions

■

Create system restore points using the Windows System 
Restore feature.

■

Store personal files in the Documents folder and back up 
these folders periodically.

■

Back up templates stored in their associated programs.

■

Save customized settings in a window, toolbar, or menu bar 
by taking a screen shot of your settings.

The screen shot can be a time saver if you have to reset your 
preferences.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands