manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 255

Backup and Recovery

Maintenance and Service Guide

B–3

Using System Restore Points

When you back up your system, you are creating a system restore 
point. A system restore point allows you to save and name a 
snapshot of your hard drive at a specific point in time. You can 
then recover back to that point if you want to reverse subsequent 
changes made to your system.

✎

Recovering to an earlier restore point does not affect data files 
saved or e-mails created since the last restore point.

You also can create additional restore points to provide increased 
protection for your system files and settings.

When to Create Restore Points

■

Before you add or extensively modify software or hardware.

■

Periodically, whenever the system is performing optimally.

✎

If you revert to a restore point and then change your mind, you 
can reverse the restoration.

Creating a System Restore Point

1. Select 

Start > Help and Support > System Restore

.

The System Restore window opens.

2. Click 

Create a restore point

, and then click 

Next

.

3. Follow the on-screen instructions.

Restoring to a Previous Date and Time

To revert to a restore point (created at a previous date and time), 
when the computer was functioning optimally:

1. Select 

Start > Help and Support > 

S

ystem Restore

.

The System Restore window opens.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands