manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 174

5–58

Maintenance and Service Guide

Removal and Replacement Procedures

2. Remove the silver Phillips PM2.5×5.0 screw 

1

 that secures 

the audio board to the computer.

3. Slide the audio board 

2

 back to disengage the audio 

connectors from the base enclosure.

4. Remove the audio board 

3

.

5. Disconnect the audio board cable 

4

 from the system board.

✎

The audio board cable is included with the audio board spare 
part kit and is also included in the Cable Kit, spare part number 
434677-001.

Removing the Audio Board

Reverse the above procedure to install the audio board.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands